30mm profiles - one of our main profiles
We’re often asked to create a wide range of different applications. These profiles is where we typically start. Generally if there are very light loads (50kg and under), we might look to using the 30mm profiles, but as a general rule, we can cover most applications with 40×40 profiles. The key lies in the overall design, support and understanding what your project needs.
Before designing deciding on a project, or looking for something that’s too large or small, get in touch with us to help with the design.
Types of 30mm F-slot profiles
16×40, 20×10, 20×30, 30×50, 30×60, 30×100. 30×150
30 x 60, 30 x 100, 30 x 150mm profiles -
- for applications that need a bump in strength
The way that we look to use 40×80 profiles is based on minimising deflection and/or providing extra slots to work with. So if there’s an application where your span needs to be a little longer, needs an extra slot for a panel or mounting equipment we’ll use a 40×80 to make sure your design is reached. Combined with the 40×40 profiles, we cover almost all our projects with just these handful of options.
Let us know what you need and we’ll make sure that your project and our design experience combine to create the right end result for you.
Can we help with your technical enquiry?
Let us know what it is that you're looking for, a bit about your project, and we'll make sure that you're getting the right product for your project.